Product Description
1. The LC has become the connector of choice for singlemode fibers and is mainly used in fiber optic instruments, SM fiber optic components, and in high speed fiber optic communication links.
2. This high precision, ceramic ferrule connector is equipped with an anti rotation key, reducing fiber endface damage and rotational alignment sensitivity of the fiber.
3. The key is also used for repeatable alignment of fibers in the optimal, minimal loss position. Multimode versions of this connector are also available.
4, Both ends of the optical fiber jumper transceiver module wavelength must be consistent, that is to say the two ends of the optical fibre optical module must be the same wavelength, the simple discrimination method is the light module to the colour line. Under normal circumstances, the short wave optical module uses multimode fiber (orange fiber), the Naga Namihikaru module uses a single mode fiber (yellow fiber) to ensure the accuracy of data transmission.
5, Optical fiber in use not excessive bending and winding, this will increase the light attenuation in the transmission process.
Technical specifications:
| Item | Unit | LC/SC/FC/ST Fiber Patch Cord |
| | | SM | MM |
| Fiber Diameter | um | 9/125 | 65.5/125 | 50/125 |
| Endface Type | | PC | UPC | APC | PC | PC |
| Insertion Loss | db | ≤0.2 | ≤0.15 | ≤0.2 | ≤0.1 | ≤0.1 |
| Return Loss | db | ≥45 | ≥50 | ≥60 | - | - |
| Insert-pull Test | db | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.15 | ≤0.15 |
| Interchangeability | db | ≤0.1 | ≤0.1 | ≤0.15 | ≤0.1 | ≤0.1 |
| Temperature Range | ℃ | -40~+80 |
Fiber jumper after use must use to protect the optical fiber attachment, dust and oil will damage the fiber coupling.If the fiber optic connector is dirty, you can use a cotton swab dipped in alcohol cleaning, otherwise it will affect the quality of communications.
Features:
---Cable outer jacket available in PVC, Low Smoke Zero Halogen (LSZH)
---PC, UPC, APC connectors type available
---High concentricity 2.5mm ceramic ferrule for FC, ST, SC and 1.25mm ceramic ferrule for LC and MU
---Position A/Position B markings
---Available in 0.9mm, 1.6mm, 1.8mm, 2.0mm, 3.0mm sizes
---100% tested on optical performance (Insertion Loss Customer specified length & Return Loss)
---Standard colour is Yellow, Orange, Aqua or Purple, other colours available upon request
Applications:
Gigabit Ethernet;
Active device termination;
Telecommunication networks;
Video;
Multimedia;
Premise installations;
Local area networks;
FTTH FTTX applications;
CATV.
